 |
Ruko Countersink 12.4mm 15x55mm
12.4mm. CBN-ground ultra-sharp flute with 8mm dia shank. Use on steel, cast iron and non-ferrous metals. 90° straight shank, 2 cutting edges. DIN 335 Type C. Made in Germany.... More |
|
Screwfix Direct
£
9.99
 |
|
|
|
|
Ruko Countersink 6mm 10.4x50mm
With CBN-ground ultra-sharp flute for use on steel, cast iron and non-ferrous metals. 90° straight shank, 2 cutting edges. DIN 335 Type C. Made in Germany.... More |
|
Screwfix Direct
£
9.99
|
|
|
|
|
Ruko Countersink 10mm 16.5x60mm
With CBN-ground ultra-sharp flute for use on Steel, Cast Iron and non-ferrous metals. 90° straight shank, 2 cutting edges. DIN 335 Type C. Made in Germany.... More |
|
Screwfix Direct
£
13.99
|
|
|
|
|
Ruko Slotted Deburring Cutter 8mm 5-10mm
Slotted taper for chatter-free deburring and countersinking. Made from 90° HSS CO5, 5% Cobalt content. Through slot chip removal prevents chips from clogging in workpiece. Gives best results at low cutting speeds in steel, cast iron, non-ferrous and light metals. Made in Germany.... More |
|
Screwfix Direct
£
13.59
|
|
|
|
|
Ruko Slotted Deburring Cutter 6mm 2-5mm
Slotted taper for chatter-free deburring and countersinking. Made from 90° HSS CO5, 5% Cobalt content. Through slot chip prevents chips from clogging in workpiece. Gives best results at low cutting speeds in steel, cast iron, non-ferrous and light metals. Made in Germany.... More |
|
Screwfix Direct
£
10.59
|
|
|
|
|
Ruko Cutting Paste 50g
50g. Cutting Paste in a plastic container. Use as a coolant when drilling. Always follow manufacturer's instructions.... More |
|
Screwfix Direct
£
3.49
|
|
|
|
|
Meade 12.4mm 4000 Series Super Plossl Eyepiece
Meade Series 4000 eyepieces yield the widest possible fields of view, consistent with pinpoint edge-of-field sharpness and long eye relief-and yet with extremely low astigmatism, spherical aberration, and off-axis colour. Incorporating 7-layer multi-coatings and edge-blackened optics for optimum ima... More |
|
Jessops
£
52.99
|
|
|
|
|
