 |
Veritas Cabinet Scraper
This cabinet scraper is a very useful and versatile tool. Used in place of a much heavier belt sander, it can clean a dirty workbench top, remove dried glue and smooth a panel or tricky grain tabletop efficiently, leaving behind a surface free of tear-out, digs or gouges.... More |
|
DIY Tools
£
33.95
 |
|
|
|
|
Veritas The Plugger
Used in a hand drill, it reams the hole, which you then plug with a dowel (or scrap of wood) sharpened in your pencil sharpener. The plug matches the hole perfectly every time. It works equally well preparing holes for decorative plugging.... More |
|
DIY Tools
£
11.29
|
|
|
|
|
Veritas Dowelling Jig
This jig will not only do centered dowelling, but it will dowel boards of different thicknesses to one reference face – the assembly is perfectly flat on one side and all thickness variations are on the other side. This saves a lot of planing and scraping time.... More |
|
DIY Tools
£
49.95
|
|
|
|
|
Veritas Carvers' Bench
The Veritas® Carver's Bench combines the elements of versatility, stability and sheer mass needed for a carver's bench. Made in Canada.... More |
|
DIY Tools
£
479.95
|
|
|
|
|
Veritas Self Drilling Jig
The shelf drilling jig prevents the need to mark every hole before drilling: set the jig's rails at the desired inset from the edge, fix them in position with the thumbscrews on the clamp rods, then drill.... More |
|
DIY Tools
£
109.99
|
|
|
|
|
Veritas Straight Jig
This grinding jig works on the rest of any bench grinder especially the Grinder Tool Rest. Put a tool in the jig, slide it against the alignment pin & one thumbscrew to square it, adjust the blade projection for bevel angle & tighten. The tool is now held squarely in the jig at the chosen bevel angl... More |
|
DIY Tools
£
15.75
|
|
|
|
|
Veritas Bevel Gauge
Half the secret of sharpening is the control of blade geometry. Nothing is handier than a bevel gauge for quickly checking the grind angle of chisels, plane blades, turning tools, etc. A quick check confirms the angle last used for grinding or honing so that the edge geometry can be maintained... More |
|
DIY Tools
£
3.50
|
|
|
|
|
Veritas Right-Angle Sled
The Veritas® Right-Angle Sled is an extremely versatile accessory, giving you a foolproof finger-joint system, complete control of end routing, and a simple, accurate way to dado work up to 8 wide. The sled straddles the router fence for rock solid support to the right-angle arm."... More |
|
DIY Tools
£
79.00
|
|
|
|
|
